Product Overview
EQUIPMENT MAINTENANCE PROCEDURES:
The unit is equipped with a double-shielded permanently lubricated ball bearing motor,
assuring long life and quiet operation. No additional motor maintenance is required.
Proper maintenance is critical to extend the life and efficiency of the filtration system.
The information presented below outlines basic maintenance procedures to ensure the
ARBE Model #DC-800 unit will provide a trouble free and clean work environment for
years to come.
GENERAL FILTER MAINTENANCE:
Polishing dust is accumulated onto the outside surface of the filter bags located in the
lower compartment of the dust collector. Arbe Machine recommends shaking down the
l
filter bags daily to dislodge the dust onto the collecting pan located below the bags. The
shakedown of the filter bags is easily done by kicking down the foot pedal located on the
lower right of the dust collector cabinet. De-pressing the pedal approximately six times
should satisfy the shakedown procedure. The dust collector door should always be
securely in place during shakedown to prevent loss of dust. The dust in the collecting pan
should be removed and stored once a week.
It is very difficult to pre-determine a specific maintenance schedule, as the rate of dust
loading will vary for each person. To ensure maximum suction throughout life of unit,
Arbe Machine recommends filter bags be changed once every twelve months. Only Arbe
Machine filter bags should be used when changing filters to ensure safety and efficiency
of unit.
Arbe re-order Model #DC-800.001 (set of 14 Filter Bags FI 1/2 HP Dust Collector)
*NOTE: When opening access door to remove collecting pan, unit must be powered off.
Safety Precautions:
Keep all fastening hardware, including spindles, tight to ensure that the unit is in a safe
working condition.
Unplug unit from electrical outlet when any servicing is being done.
Never operate unit without access door securely in place.
Keep all loose clothing, hair or dangling objects from shafts or buffing wheels.
* Heavy wall sealed cabinets ensure maximum collection efficiency with the least amount of noise and vibration.
* Standard stack on silencers are included on all of the floor model units.
* Bag shaker pedal and large pull out pan ensure trouble free and easy maintenance.
* Ultra-weave cotton sateen filter bags collect all solid particulate down to 1/3 micron.
* Powder coated finish.
* HP: 1/2
* CFM: 400
* Stations: 1-2
* Filter Area: 15sq. ft.
* Shipping Weight: 87lbs.
* Dimensions: 16"W x 16"D x 20"H
